Introduction

Having the heels of your boots torn off can be extremely frustrating. Cowboy boots go through extensive wear especially because they are typically worn for physical work rather than a fashion statement. It is natural to have your boots deteriorate over time and it is recommended to repair and reinforce damaged parts as soon as possible.

If you or someone you know have a broken heel on a cowboy boot, this guide details a step-by-step process of properly repairing an unstable heel. Cheap, fast, and effective, our guide ensures an affordable and functional method for fixing your boots.

  1. DKlfXrIqTbMvcqnE
    DKlfXrIqTbMvcqnE
    xCH1BKLcElhmDnlQ
    • Identify and assess the damage on the heel of your cowboy boot.

  2. UZSpETU5oOSKFSRB
    UZSpETU5oOSKFSRB
    GuImqcSPStpMvXVv
    • Take a piece of sandpaper and sand down the inside of the broken heel.

    • This will allow the glue to adhere to a smooth surface.

  3. c3M5ckWenRSwsFgA
    c3M5ckWenRSwsFgA
    w1WEqJYFIJIVEjgK
    e4Lyn2cDhYjA4XiI
    • Apply a small amount of Shoe Goo to the paintbrush.

    • Use the paintbrush to apply the glue on the inside of the broken heel.

    • Shoe Goo contains strong chemicals that are unsafe to inhale in large quantities.

  4. cVKTvOfqAcjUGtKp
    • Hold and apply pressure to the boot with your hands for at least 5 minutes.

    • Wait an additional 5 minutes for the glue to dry.

  5. 1rlGR2SVXge53lfK
    1rlGR2SVXge53lfK
    p5PgvbVUelThWnF4
    qZIUdRLCCWwFTGXr
    • Measure the length of each side of the heel with the leather strip.

    • Cut two pieces of leather using scissors corresponding to the measured length of the right and left side of the heel.

    • If the leather strips are too thick, cut the measured leather strips vertically in half for thinner strips.

  6. 4IU1NrLeNvgjlTyf
    4IU1NrLeNvgjlTyf
    CUdErPlLC54URhZg
    c5nE2m6OIHC5uCKn
    • Apply glue to the leather strip with the paint brush.

    • Place the strip on one side of the boot along the heel.

  7. YSMHWnWencaKZjtW
    YSMHWnWencaKZjtW
    XbFQkYY6bvn5SKWt
    • Apply glue to the other leather strip.

    • Place the strip onto the other side of the boot, so that both pieces meet at the back.

    • These leather strips will reinforce and protect your heel from detaching again in the future.

  8. 6q15PFJFIQsmuSZh
    6q15PFJFIQsmuSZh
    gsJQPOlTAwBFgR6X
    m5pUMpP1fxUHjbNG
    • Rub the sponge on the mink oil for 30 seconds.

    • Apply the oil to the leather parts of the boot.

    • Mink oil waterproofs, restores, and protects the leather.

  9. jUVoA5hQ1BUarJvH
    • Enjoy your newly fixed cowboy boot!

    • Let the glue dry for 24 hours until wearing it.

Conclusion

Thank you for using our guide! Enjoy your fixed boot!

Nat Ericksen

Member since: 05/11/24

169 Reputation

0 comments