Introduction

  1. gvCbWVmoL6IaoeRm
    gvCbWVmoL6IaoeRm
    CA5Akb6EBdOGkVZF
    aNfUfbdIt2mBaGp2
    • The USB memory stick is getting loose. The protruding metal part slides back and forth. One day, you are unable to insert it properly and read it.

    • Open the two plastic halves by a cutter. It may a bit destructive depending on the model.

    • You will probably find a very small plastic part broken off. this part is designed to hold the entire card in translation. Its size and robustness are obviously grossly underestimated, as you can see here.

  2. UYXdwPgRywedOrPj
    UYXdwPgRywedOrPj
    EmlsoamOBRYOap6L
    • Hot glue gun will do the trick, fill the empty space to prevent the memory card from sliding.

    • Assemble again. Your disk is like a new!

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michal Ruzek

Member since: 27/01/22

739 Reputation

0 comments