Introduction
Make sure you have the necessary tools in order to complete the LCD screen replacement for the Sony Cyber Shot WX80 and be sure to have a steady hand when dealing with the smaller and more fragile parts.
Tools
Parts
-
-
Begin by removing all six 40mm by 10mm black screws holding the outer frame together with the Phillips #00 screwdriver.
-
-
-
Remove the free-moving flap near the battery port and store in a safe place.
-
Pry the front cover off gently. Use a plastic opening tool if available.
-
Now pry the back cover off gently, using a plastic opening tool if available.
-
-
-
Remove the #00 screw from the right hand side (from the LCD screen side) which is adjacent to the master control dial.
-
Use a spudger or plastic opening tools to pry up the LCD screen and free the two metal tangs on the left side.
-
Lift up two more metal tabs held down by a thin red plastic strap on the right (master control dial) side. Reference the third image.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
Would the wheel be included with the LCD? The wheel on my camera is broken, and I would like to fix/replace it, so should I just order a new LCD screen?
Caleb V. -
The replacement includes just the compatible LDC screen and the connector; the wheel is a separate piece.
The LCD comes naked, meaning that the fancy screen protector with black frame is not provided. It is kind of a sticker which shall be detached from the original LCD and re-attached to the new one. It would have been a good idea to include it within the fix tip.